Call us: +41 62 398 29 39
Language:
shopping_cart
Cart
(0)
Ball bearing slewing ring with internal toothing external Ø 518 mm
KKD500L-360/IZ
2,116.00
Tax excluded
- Ball slewing rings with internal toothing
- Rolling elements made of rolling bearing steel, ball raceways surface-hardened.
- Material: C 45 N according to DIN 17200.
- Permissible bending stress in tooth root: 130 N/mm² normal
- Permissible bending stress in tooth root: 260 N/mm² maximum for a short time.
- Thread depth t: 20 mm
- Distance below outer ring H: 11.5 mm
- Bore Ø M: 12 mm
- Bore Ø B: 18 mm
The bearing surface for the large-diameter antifriction bearings must be flat so that the bearings are not strained when screwed on. This could cause bottlenecks to form in the raceways, which would result in load peaks at these points.
- Rolling elements made of rolling bearing steel, ball raceways surface-hardened.
- Material: C 45 N according to DIN 17200.
- Permissible bending stress in tooth root: 130 N/mm² normal
- Permissible bending stress in tooth root: 260 N/mm² maximum for a short time.
- Thread depth t: 20 mm
- Distance below outer ring H: 11.5 mm
- Bore Ø M: 12 mm
- Bore Ø B: 18 mm
The bearing surface for the large-diameter antifriction bearings must be flat so that the bearings are not strained when screwed on. This could cause bottlenecks to form in the raceways, which would result in load peaks at these points.
KKD500L-360/IZ
Data sheet
Total height (H):
56 mm
Outer ring Outer Ø (Da):
518 mm
Inner ring Inner Ø (Di):
325 mm
Bolt circle outer Ø (La):
490 mm
Bolt Circle Ø Inner (Li):
375 mm
Inner ring Outer Ø (O):
412.5 mm
Running circle Ø (DL):
414 mm
Outer ring Inner Ø (U):
415.5 mm
Bearing seat Ø (C):
454 mm
Pitch circle Ø gearing (d):
335 mm
Number Pinion Gear:
67
Tooth width (b):
44.5 mm
Module:
5
Admissible circumferential forces Normal (UF norm):
12.32 kN
Maximum admissible circumferential forces (UF max):
24.64 kN
Gear position:
Internal gearing
